EdgeWave iPrism 55h Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} EdgeWave iPrism 55h. EdgeWave iPrism 55h 4 pages. Web filter appliance upgrade guide
Également pour EdgeWave iPrism 55h : Manuel de mise à jour (12 pages)

Imprimer la page
Quick Start Guide
V6.52X / V7.0
Models 35h, 55h, 105h - LCD Panel
2.1
Connect one end of the white Ethernet Cable to the iPrism's internal interface and the other end to a switch in your LAN.
Important: Do not connect the external side of the iPrism at this point
2.2
Power up your iPrism by pressing and holding the red power button. LCD screen displays the software version number (this may take 2-3 minutes).
2.3
Each of the LCD front panel buttons has a function – up and down arrows move through menu items, check mark selects the option and "x" button
saves and/or exits.
Use buttons to do the following: Proceed to the
• Set the IP Address
• Set the netmask
• Set the gateway
2.4
Proceed to the Installation Wizard (Step 3)
Step 3.
Run the Installation Wizard
To complete the Installation Wizard you will need the setup data you recorded in
saved to your desktop.
The following is an outline of the Installation Wizard steps:
3.1
Username and Password
The Wizard will prompt you for a user name and password. The defaults are Username: iprism; Password:
3.2
Agree to License
You will be prompted to accept the License Agreement. Read the agreement and click
3.3
New or Restore Config
New Customers
should select
Existing customers
can restore their settings from their backup by selecting
completed the iPrism will shut down. Existing customers may proceed to
3.4
Enter Install Key
When prompted, browse to the directory where you saved your
3.5
Enter Contact Info
On the
Registration Information
important iPrism product update information. It is recommended that you change your password by selecting
3.6
Network Screen Setup
On the
Network Settings
the
Name Servers
pop-up window. Enter your DNS address and select
Next
to continue.
Please Note: Some values on this page may be pre-populated but can be changed.
3.7
Filter Settings
Determine whether you wish to monitor or block your Web and application traffic and select the iPrism time zone from the drop-down menu.
3.8
Review Settings
When prompted, review your configuration settings and click Finish. To make changes to your settings, click
Please note: You will only be able to use the Print option with a local printer. Configuration reports will be available once you reboot.
3.9
Once you save your settings, iPrism will save and apply them and reboot automatically – this may take 4-5 minutes.
Installation Wizard
• Set the link speed (default is auto)
• Set the link duplex (full is used for most systems)
• Select YES to save your settings
Start a New Configuration
screen fill out your contact information. Choose carefully, your Administrator email is used for delivering
page enter the setup data you recorded in
(Step 3)
Step 1
and click
Next
to continue.
Restore from Archive
Step 4
iPrism License Key file
Step 1.
To enter the IP address for your DNS, select
OK
to continue. Enter your IP address recorded in
iPrism Web Security
and your
iPrism License Key
setup
Agree
to continue
and then uploading their archive. Once that is
and select
Next
to continue.
Set
Password.
Back.
file which should be
DNS Settings
then
Add
in
Step
1.4. Select
OK
then