DiyTracker REAL TIME GPS TRACKING AND MONITORING SYSTEM Manuel de l'utilisateur Instructions d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} DiyTracker REAL TIME GPS TRACKING AND MONITORING SYSTEM. DiyTracker REAL TIME GPS TRACKING AND MONITORING SYSTEM 15 pages.

Imprimer la page

Control

Remote

Panic (Siren)

Arm: Buzzer sounds once

Disarm: Buzzer Sounds Twice

Mute Key: Press this button to stop/mute the siren.

In panic, Activate Siren to sound. Or in parking lot, press this button for to locate the motorcycle

Remote Control / Transmitter OVERRIDE

If your transmitter is damaged, or the transmitter battery is flat, the system can be

overridden by Ignition switch in conjunction with the Panic Button.

Please follow the below process to override the remote control / transmitter

1. Send an SMS command to clear all existing transmitter codes which is stored in the system

2. Disarm the system by SMS command

3. Press and Hold Panic button

4. Switch Key from ACC off to ON position continuously 7times

5. Buzzer will sound once to indicating Overridden mode has been entered

6. Press any button of the transmitter

7. Buzzer sound twice again to indicate override success and exit overridden mode

If the system enters into override mode, and no transmitter button was pressed or did not receive any

incoming signal within 20seconds, buzzer will sound bibibi three times and the system will exit override mode

If you pressed the transmitter button during override mode, but system failed

due to an unexpected reason, the system also will sound bibibi three times to indicate failure.

Arm

Disarm

Mute