EDgun EDMS Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} EDgun EDMS. EDgun EDMS 16 pages. Digital measuring system

 If there is still no data to analyze (you have not made a single shot

yet), a dash is displayed

 If the current pressure becomes less than the set as deafult Pmin

(120 Bar by default, the user can change this value independently

in the settings), a warning is displayed



Please pay attention

the pressure rises, the temperature rises, when the pressure drops, the

temperature drops. Thus, when the air pumped into the reservoir, the

temperature inside it grows, and when you shoot your gun, it falls.

As a result, We decided to artificially limit the "monitoring" time for

changing the pressure to give the user the opportunity to receive data without

long waiting.

Thus, if you are conducting "tempo" shooting, the gauge will not be able to

track the actual pressure drop (without taking into account the temperature

dependence), and there may be errors in calculating the remaining number of

shots.

The EDMS will predict the efficiency based on the gun's current usage. Like

a car predicts the number of miles left in your tank as you're driving. The

anticipated miles will change if you travel on the highway versus stop and go

city driving. The same methodology applies to the EDMS tracking.The

EDMS understands the ratio of pressure increase and heat. Therefore the

EDMS slightly overstates the pressure drop per shot. And if, for example, to

make ten shots and sum up the pressure drops for each shot, this amount will

be slightly more significant than the difference between the initial pressure

and the pressure after the 10th shot, because as long as ten shots fired, the

tank continuously exchanged heat with the environment.

Please pay attention to the following feature: when