ClearWater Ozone Systems PRO400 Manuel d'installation et d'entretien - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} ClearWater Ozone Systems PRO400. ClearWater Ozone Systems PRO400 8 pages. Circulation system

Imprimer la page

• Read and follow all instructions

• Save these instructions

• Before attempting any electrical connections, be sure all power is

off at the main circuit breaker.

• Install electrical equipment at least five feet from any open body of water,

using non-metallic plumbing

• Be sure to bond (ground) the system using the copper lug on the bottom

of the PRO400. The system should be bonded with solid copper wire

conforming to all local, state and national electrical codes.

Two aspects of ClearWater Tech ozone generators

represent potential dangers, ozone gas and

high voltage electricity.

OZONE GAS - WARNING: Low concentrations of

ozone

can cause irritation to the eyes, throat and respiratory

system.

HIGH VOLTAGE - WARNING: ClearWater Tech ozone

operate at high voltages. If contact is made with

operating high voltage components electric shock will occur.

Compare the ozone system equipment to packing list provided. Before

beginning any installation procedures, thoroughly inspect all components

for damage. If damage is noticed, promptly notify the freight carrier and

request an on site inspection. Inspect all packing materials for small

parts before discarding.

generators