Altrason Humidry BRB-230V Manuel d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Altrason Humidry BRB-230V. Altrason Humidry BRB-230V 13 pages. Ceiling mounted desiccant rotor multifunctional dehumidifier
Imprimer la pagePlease stop using the unit if the following troubleshoot does not resolve the
Problem
Unit failed
to start
Vibration or
abnormal
noise
Unable to control
with Wall Panel
Unable to control
with Remote Control
Troubleshooting
problem and contact an authorized service personnel.
Possible Cause
Unit not powered
Unit and wall panel not connected
Insufficient ceiling strength
Insecure installation
PTC crackling sound
Controlling the Wall Panel
with wet hands
Bad Wall Panel connection
due to loose wire
Remote Control doesn't
have enough power
Batteries installed incorrectly
Correction
Please check to make sure the
breaker and power lines are
connected, power cord plugged.
Make sure the LED indicator is
displaying normally and check
the connection of the cable to
the Unit and the Wall Panel.
Make sure the unit is securely
mounted on suitable material in
the ceiling.
Secure the screws.
PTC heater will activate during
Smart Room Heating, Enhanced
Dehumidification, or Smart
Clothes Drying, which may create
a sound due to heating and
cooling of air around the PTC. Not
a malfunction.
Please dry your hands.
Unplug the Wall Panel and
plug it back in.
Change new batteries.
Make sure the battery direction
is correct.