ClearWater Lights Billie Manuel d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ClearWater Lights Billie. ClearWater Lights Billie 12 pages. Dimmable
Summary of CANopener Features & Operation
Step 1: Parts List and Bike Preparation
Step 1: Mounting & Wiring The Billie Brake Light
Congratulations on the purchase of this revolutionary Billie brake
light. This is a high output brake-tail light that is computer controlled by the
Clearwater CANopener. This brake light is intended for use on specific BMW
motorcycles that use the CANbus control system.
This brake light installs in place of your license plate frame (our apologies to your
dealer for robbing his valuable advertising space). The Billie brake light and frame
are CNC machined from billet aluminum and are very solid. The aluminum frame
not only helps mount your license plate, but also serves as a heat sink for the
powerful
RED
LED emitters.
Installation is simple. Just feed the small black cable up through your bike's rear
fender section and up to the area under your rear seat. Then, secure your license
plate to the Billie frame with the included bolts. Use the included bolt spacers if
there is any chance for the grommet to become kinked against the rear fender.
Now, connect the
of the CANopener. Finally, connect the BLACK wire from the Billie to the BLACK
wire coming out of the back of the CANopener. Ignore the yellow wire on a BMW
installation.
Check routing of wires and tuck the CANopener back in place.
Note: The bike must be running for the brake light to function.
Billie Brake Light Features
-Automatic brake light activation with variable flash rates.
-Adjustable tail light and brake light intensity for daytime.
-Adjustable tail light and brake light intensity for nighttime.
-4 brake light flashing programs
-Speed sensitive activation
Page 2
RED
wire from the Billie to the
Page 1
RED
wire coming out the back