ClearWater Lights CANopener Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ClearWater Lights CANopener. ClearWater Lights CANopener 13 pages.
Clearwater CANopener operation and features
DIMMING CONTROL (Wonder Wheel equipped bikes)
DIMMING CONTROL (Wonder Wheel equipped bikes)
Information on Dimming: : Two modulated brightness channels are adjustable using
Information on Dimming
the Wonder Wheel.
10-100%) in three different modes (day, night, and high beam). Settings are stored,
and will be remembered when restarting the bike or disconnecting the battery. The
dimmer is programmed at the factory for the most useful day/night settings. Follow
the procedure below to enter dimming mode.
Step 1
Step 1: To enter into dimming mode, first
: To enter into dimming mode, first
press & release the TSC button shown in
press & release the TSC button shown in
the figure to the right.
the figure to the right.
Step 2: To adjust Glenda/Darla lights,
Step 2
: To adjust Glenda/Darla lights,
hold the Wonder Wheel to the left for 2
hold the Wonder Wheel to the left for 2
seconds. To adjust Krista/Erica/Sevina
seconds. To adjust Krista/Erica/Sevina
lights, hold Wonder Wheel to the right
lights, hold Wonder Wheel to the right
for 2 seconds. The lights should flash
for 2 seconds. The lights should flash
twice. The brightness level can then be
twice. The brightness level can then be
adjusted by rotating the wheel.
adjusted by rotating the wheel.
Step 3: To exit dimming mode, press and
Step 3
: To exit dimming mode, press and
release the TSC button again. This will
release the TSC button again. This will
lock in the brightness setting.
lock in the brightness setting.
Note - Remember that each set of lights are adjustable for day and night.
Day and night settings are automatically selected by the ambient light level
reaching the bike's photocell. To adjust the night dimmer, simply cover the
dash display using your hand or a towel. Activating the high beam switches the
lights to 100%. If you want your high beam dimmed, simply perform the same
commands in high beam.
WARNING:
When configuring the dimmer, be sure that the Wonder Wheel is not
making adjustments to other functions of the onboard systems. Turn off the
entertainment system to prevent volume adjustment or unwanted channel
Page 6
Each channel is programmable for (11) brightness settings (3,
changes, and select the home screen on the GPS.
Page 5