3HS RMS-D II Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} 3HS RMS-D II. 3HS RMS-D II 13 pages. Ceiling mounted visual smoke detector

Imprimer la page

Installationshandbuch RMS-D II und RMS-V II

Mounting RMS-V II

The smoke detector must be mounted on a stable structure. Dust and other impurities

must be removed from the ceiling before the smoke detector can be replaced.

Drill a round hole with a 75mm diameter and at least 100mm deep in the ceiling. Please

note that the in-wall socket can only be fastened in a hole with a 75mm diameter.

Connect the wire with the smoke detector in accordance with the installation plan in

Fig. 2.

In order to avoid perturbations, the RMS-V ll should be grounded.

Screw the stainless steel plate on the ceiling with the safety screws, which prevent

unauthorized opening of the smoke detector.

Remove the protective foil from the front of the smoke detector before turning on the

voltage supply.

Installationshandbuch: RMS-D II und RMS-V II Relais

®3HStrading GmbH&Co.KG, Königsheimer Strasse 13,

D-78603 Renquishausen, Tel. 07429 33 61 Fax. 07429 91 61 335,

www.3HS.de

Seite 9 von 13

Stand: 01.12.2015

Version:2.7