Altrex SHUTTLE Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Altrex SHUTTLE. Altrex SHUTTLE 20 pages.

5. Using the Shuttle

Hoisting with the Shuttle

1. Mount the correct console (Part G / J) to the Shuttle.

2. Place the load.

•

Shuttle Carrier: place the load in the crate. Make sure that the load does not protrude outside the crate.

•

Shuttle Solar: place the solar panel on the Solar carrier and fix it

3. Place the socket wrench adapter on the safety clutch.

4. Hoist the carriage by turning the portable drill (powertool) to the left in combination with socket wrench M10.

5. Lock the winch when the carrier is in its highest position.

6. Unlock the solar frame, turn the carrier 90 degrees and slide the solar panel on the scaffolding.

7. Use the wind strap of the solar frame to secure the carrier. The wind strap must be used under all circumstances.

Pay attention to the following points when using the solar frame and solar carrier:

•

Always fasten the solar panel securely.

•

Make sure the solar carrier is in its locked position during lifting so that it does not open by accident.

•

Always secure the carrier with the wind strap after use.

6. Use of the wind strap

Place the ring of the wind strap over the collar tube as shown in the picture below.