Edic Endeavor 9000I-HSH Manuels rapides - Page 6

Parcourez en ligne ou téléchargez le pdf Manuels rapides pour {nom_de_la_catégorie} Edic Endeavor 9000I-HSH. Edic Endeavor 9000I-HSH 15 pages.

Imprimer la page
GFCI FUNCTION:
Each power cord is equipped with a GFCI (Ground Fault Circuit Interruptor) box. The GFCI is
designed to trip and cut off power in the event of an unsafe electrical condition. Any time the
power cord is plugged in or unplugged, you must reset the GFCI box by pressing the red button
on the GFCI box.
CIRCUIT LOCATOR:
The ENDEAVOR has a built in circuit locator that is designed to detect the availability of two circuits. Do not
connect both of the power cords to the same wall outlet. If the green light on the front panel (marked CT) turns
on, then you are on two separate circuits. If it fails to turn on, you must locate another outlet on another circuit
until it comes on. Although the ENDEAVOR's functions may operate normally, do not ignore the circuit
locator as doing so may overload a single circuit and blow the wall breaker.