AltRider Hemisphere Saddlebag Instructions d'installation et d'entretien - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} AltRider Hemisphere Saddlebag. AltRider Hemisphere Saddlebag 7 pages.

Imprimer la page

Hemisphere Saddlebag

Your Altrider Saddlebag will carry your gear securely and in the correct position

for best handling of your motorcycle in even the most challenging conditions.

Start by familiarizing yourself with the components of the Saddlebag and 'dry

fitting' the saddlebag on your motorcycle. There are three straps that will secure

the Saddlebag to the bike - the two side straps attach to your sub frame, main

frame or in the case of the KTM 690 (shown one page 1), to the rear tubes of the

trellis frame. The idea is to mount the Saddlebag on the bike far enough to the

rear to not interfere with the riders' position and not too far back to stress out

your rear fender.

Once you have determined your preferred position on the motorcycle, adjust

the rear connection strap with coated metal hooks to your rear fender. You

should only need to make this adjustment once as it becomes a static connec-

tion point. This strap with hooks is what is preventing the Saddlebag from slid-

ing forward, the two lower connection straps in combination with the custom

tailored shape are doing the majority of the work. To create and anchor later the

front straps will create needed tension.

Note: You can use the rear compression straps to attach another small bag

BEHIND the Saddlebag - avoid stacking gear on top of the Saddlebag as it can

adversely affect handling.

Here you can see correct position of the hooks. The strap has yet to be tightened

in this photo. All motorcycle rear fenders are fairly similar but some may need a

slight modification of the plastic to allow the hooks to seat themselves onto the

fender. If you have a rear rack or prefer to use the passenger grab bars, you can

simply feed the strap through and not use the coated metal hooks.

Installation & Care Instructions