AltRider R117-X-1001 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} AltRider R117-X-1001. AltRider R117-X-1001 6 pages. Crash upper bars for bmw r 1200 gsw 2017+
Imprimer la page2
1
Using T25 driver, remove four (4) screws holding the side panels in place, (two
fasteners on each side) where indicated. Note: pay close attention to where each
fastener comes from, some are different lengths.
A
3
Remove the four (4) screws (two each side) at the rear of the beak plastic. (A) One on top near the tank, (B) one on the side just under the edge.
(Left side of bike only shown in the pics above)
//
BMW R 1200 GS W
Upper Crash Bars
TIP:
Using T25 driver remove the (4) screws holding radiator
2
shrouds in place, (2) on each side.
Remove each side panel, take care with clips and note how the
panels fit together for reinstallation.
B
//
Installation Instructions
!