Edic Saturn 20DS3-Bk-SV Manuel du propriétaire/de l'opérateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire/de l'opérateur pour {nom_de_la_catégorie} Edic Saturn 20DS3-Bk-SV. Edic Saturn 20DS3-Bk-SV 13 pages. Low speed and dual speed floor machine

Imprimer la page

5. Open the handle carton and set the handle nearby the

motor base.

6. Unscrew the nut (C13100 )from the pivot axle screw

(C22558). Slide out the pivot axle screw from the

handle bracket on the motor base frame.

7. Insert the pivot tube at the lower end of the handle be-

tween the handle bracket on the base frame and align the

holes to one another.

8. Insert the pivot axle screw (C22558) through the

handle bracket and the handle pivot tube. Hand tighten

the nut (C13100) to the pivot axle screw and finish by

tightening with a wrench.

ASSEMBLY OF THE HANDLE TO THE MOTOR

BASE:

1. Locate the nut (C11558) on the end of the locking

clamp handle assembly (C11536) and unfasten it.

2. Slide out the locking clamp handle (D11497) assembly

with spade bolt (C11536) and set it aside.