ARTFOX Lighting Magic 2R Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ARTFOX Lighting Magic 2R. ARTFOX Lighting Magic 2R 19 pages.

3.2. Connections

•

~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon

Connected load 350 VA (W) T6.3A (micro-fuse 5x20mm)

Please see printing on the case for the right electronic supply!

Disconnect from the mains supply for changing the fuse and use

only the above described micro-fuse type.

•

USITT DMX-512 Standard input/output in 3 pin / 5 pin

connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin

4&5 N.C. The DMX- Addressing starts at the DMX-

Address [001].

120 Ohms

You'll find the control board on the side part of the bottom. It allows

you to make all necessary adjustments of the

key you get into the main menu. Afterwards you can navigate

through the menu with the Up/Down-keys. Push the Enter-key to get

in the next menu level or to confirm your settings. Make them and set

functions ON/OFF with the Up/Down-keys. Confirm and save it with

the Enter-key. Push the Function-key to cancel the entry and go

back to the main menu.

To lock or unlock the keys of the menu field press Mode+Enter+Up simultaneously.

light

. With the Enter-

DMX512

DMX-controller