Cleaver CSCBO360 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cleaver CSCBO360. Cleaver CSCBO360 20 pages.

9. Care and Maintenance

•

Your cabinet should be clean regularly and maintained to prevent

possible corrison and any build up of mould and bacteria.

•

Turn off the power, unplug the appliance, and remove all items including

shelves and rack.

•

Wash the inside surfaces with warm water and a mild detergent.

•

Wash the shelves with a mild detergent solution.

•

Wring excess water out of the sponge or cloth when cleaning area of the

controls, or any electrical parts.

•

Wash the outside cabinet with warm water and mild liquid detergent.

Rinse well and wipe dry with a clean soft cloth.

•

Every 3 months, clean the humidity discharge tray (page 10). This is not

necessary if you have installed the addtional drainage pipe to an external

drain or waste point.

- Remove power lead from power point.

- Pull cabinet forward to access rear of the cabinet.

- Remove the protective grill.

- Empty discharge tray using a cloth and bucket.

- Thoroughly wipe clean tray and evaporation element.

•

Most power failures are corrected within a few hours and will not affect

the temperature of your cabinet if you minimise the number of times the

door is opened. If the power is going to be off for a longer period of time, you

need to take the proper steps to protect your contents.

•

For longevity of your cabinet, ideally you should keep your cabinet

running at all times. If running it empty, adjust settings to 13°C and 80%

humidity for maximum efficiency and minimum power usage.

•

If the cabinet will not be used for several months, remove all items and

turn off the appliance. Clean and dry the interior thoroughly so as to reduce

odours and mould. Leave the door open slightly all the time if necessary.

Check for any rodent damage to the wiring at the back of the cabinet before

turning back on.