Cleaver CDABU127 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cleaver CDABU127. Cleaver CDABU127 16 pages. Dry ageing cabinets

Cleaver CDABU127 Manuel de l'utilisateur

9. Care and Maintenance

Cleaning Your Cabinet

Your cabinet should be cleaned regularly and maintained to prevent
possible corrosion and any build up of mould or bacteria.
Turn off the power, unplug the appliance, and remove all items including
shelves and rack.
Wash the inside surfaces with warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda dissolved litre of warm
water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning the
controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
Every 3 months, clean the condenser/dehumidifier discharge tray.
- Remove power lead from power point.
- Pull cabinet forward to access rear of the cabinet.
- Empty discharge tray using a cloth and bucket.
- Thoroughly wipe clean tray and evaporation element.

When Not in Use

Long vacancy: If the appliance will not be used for several months,
remove all items and turn off the appliance. Clean and dry the interior
thoroughly so as to reduce odours and mould. Prop the door slightly ajara all
the time, if necessary. Check for any rodent damage to the wiring at the back
of the cabinet before turning back on.

Moving Your CLEAVER Dry Ageing Cabinet

Remove all items.
Securely tape down all loose items (shelves) inside your cabinet.
Tighten adjustable leg up to the base to avoid damage.
Lock door shut.
Be sure the cabinet stays secure in an upright position during
transportation.
Allow the cabinet to rest upright for at least 3 hours before turning on.
Protect outside of appliance with a blanket, or similar item.
12