Cleaver CDABU127 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cleaver CDABU127. Cleaver CDABU127 16 pages. Dry ageing cabinets
Imprimer la page
6. Control Panel
① Function Button:
Press once to set the temperature displayed on the LED screen ④.
Use the buttons ⑥ or ⑦ to increase or decrease temperature.
Press twice to set the humidity displayed on the LED screen ⑤ .
Use the buttons ⑥ or ⑦ to increase or decrease humidity.
② ON/OFF Button:
Press and hold for 3 seconds to power off.
③ Lamp and UVC light switch button:
Press once to turn light on/off.
Press and hold for 3 seconds to turn UVC light on.
When in normal lamp mode, light will turn off when the door is closed. When in
UVC mode, light will remain on until switched off again by pressing and holding
button ③ for 3 seconds.
④ LED Display - Temperature:
Display actual temperature when at rest.
Display the set temperature if button ① is pressed once.
⑤ LED Display - Humidity:
Display actual humidty when at rest.
Display the set humidity if button ① is pressed twice.
⑥ Temperature/Humidty setting UP button:
Increase the Temperature/Humidity setting when activated by Function Button
①.
⑦ Temperature/Humidty setting DOWN button:
Decrease the Temperature/Humidity setting when activated by Function Button
①
⑧ oC/oF Display Function Button:
Press once to change the temperature LED display to/from degrees Celsius to
degrees Fahrenheit.
9