dji DSLRPros Nighthawk Aerial Kit Manuel - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} dji DSLRPros Nighthawk Aerial Kit. dji DSLRPros Nighthawk Aerial Kit 10 pages.
Imprimer la page
The GoPro has an array of different shooting modes and settings. This can be overwhelming for users who
are not accustomed to using a GoPro, so here is a quick reference guide on our recommendations for
different shooting conditions.
• Overall best shooting: 2.7k, 30 FPS,
• Low light shooting: 1080P 30 FPS, Wide, No Pro tune
• Slow motion: 1080p at 60 fps (any setting at a higher fps than 60)
• Put all GoPro footage through "CineForm" before putting it into any other editing program.
The monitor and the GoPro must both be placed in the same video system (NTSC in the USA and
PAL in Europe) to function properly. Use the following steps to change the video system on your
GoPro.
• Power on the GoPro by pressing and holding the power button.
• Press the power button until you come to the settings menu appears on the GoPro's screen
(Wrench). Press the record button to enter the settings menu.
• Press the power button until you reach the setup menu (Two Gears). Press the record button to
enter the setup menu.
• Press the power button until you see NTSC/PAL. Press the record button to enter the menu.
• Press the power button to select the desired video system. (NTSC in the USA and PAL in Europe).
• Press the power button until you reach the exit option and select with the record button to leave
the menu pages.
7.
Flight Modes
The Phantom 1 supports multiple flight modes that allow users to control their craft in different
ways. These modes can be switched while in flight by using the toggles on the DJI transmitter.
• Attitude Mode: Maintains altitude but the craft will keep moving in one direction when influenced
by wind or inertia.
• GPS Attitude Mode: Maintains altitude and position. Even if acted upon by an outside force it will
return to its last location (where the user let go of the sticks).
• IOC Mode: No matter the position of the Phantom 1, the directional controls will always remain
the same.
8.
Phantom 1 OEM Controller/Transmitter
The Phantom 1 OEM Controller/Transmitter is the default transmitter that is shipped with the
Phantom 1 and can be upgraded to use the hidden 6
the gimbal tilt.
• Refer to the DJI tutorials for the flight controls of the OEM Transmitter.
9.
Prop Installation
It is the owner's responsibility to be certain that the propeller blades are attached properly and securely
fastened before every flight. All propeller blades are directional and can only be attached to one set of
motors. Installing a propeller blade on the wrong motor can result in damage to the craft. If you are
unsure about how to install your propeller blades, contact DSLRPros before attempting to fly your craft.
th
channel on the rear of the remote to control