dji M100-ZENMUSE X5 Series Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} dji M100-ZENMUSE X5 Series. dji M100-ZENMUSE X5 Series 15 pages. Gimbal installation kit
Imprimer la page
DJI M100-ZENMUSE X5 Series Gimbal Installation Kit
Mounting the Gimbal
The aircraft will weigh about 3.1 kg after the X5 series gimbal is attached. Be careful not to
mount additional components, such as extra battery compartments or the DJI Guidance,
which may cause it to exceed the maximum takeoff weight.
1. Mount the mounting rails C and D onto the center frame's lower plate and tighten the eight
screws (M2.5x8).
Mounting Rail C
Mounting Rail D
2. Mount the Gimbal Mounting Bracket A onto the new upper plate and tighten the two screws
(M3x5). Then mount the two Gimbal Mounting Brackets B onto the lower plate's mounting rails
and tighten the six screws (M2.5x5).
12
©
2016 DJI. All Rights Reserved.
M2.5x8
M2.5x5
M3x5
Gimbal Mounting
Bracket A
Gimbal Mounting
Bracket B
M2.5x5