dji MATRICE 200 series Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} dji MATRICE 200 series. dji MATRICE 200 series 15 pages.
Également pour dji MATRICE 200 series : Clause de non-responsabilité et consignes de sécurité (20 pages), Manuel d'entretien (2 pages), Faq (2 pages)

Imprimer la page

dji MATRICE 200 series Manuel de démarrage rapide

Using the Remote Controller

The Stick Mode is set to Mode 2 by default. In Mode 2, the left stick controls the aircraft's elevation and heading, and the

right stick controls the aircraft's forward, backward, and lateral movements. To adjust the FPV camera, press and hold the C2

Button and rotate the left dial.

Left Stick

Turn Left

For more information about how to connect and use the remote controller, please refer to the user manual.

You can change the stick mode and customize the C1-C4 and BA-BH buttons' functions in the DJI Pilot app.

4. Preparing the Aircraft

Unfolding the D-RTK Antennas (for M210 RTK V2 only)

Unfold the D-RTK antennas and then turn the knob tightly in the direction indicated by the lock icon

For the aircraft to take off, the D-RTK antennas must be fully unfolded and securely locked.

Installing the Landing Gears

Right Stick

Down

Turn Right

Forward

Backward

Left

Right

Unfolding the Aircraft

Unfold the frame arm, slide the arm lock to the end of the frame

arm, then rotate it about 90° until the silver line lies within the

range of the

icon.

FPV Camera