dji Matrice M210 RTK Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} dji Matrice M210 RTK. dji Matrice M210 RTK 15 pages. Matrice 200 series
Également pour dji Matrice M210 RTK : Manuel de démarrage rapide (18 pages)

Imprimer la page

Mounting the Propellers

Propellers without

silver rings should be

installed on unmarked

motors.

Mounting the Gimbal and Camera

Press the Gimbal

Align the white and

Detachment button

red dots and insert

to remove the cover.

the gimbal.

Make sure to press down the gimbal detachment button when rotating the gimbal lock to remove the gimbal and camera. The gimbal lock should be fully rotated when

removing the gimbal for the next installation.

Mounting the Intelligent Flight Batteries

Insert a pair of batteries.

Press once to check the battery level.

Press again and hold until the batteries turn on or off.

Only use battery slot B when using one battery to supply power. In this case, the aircraft can only be powered on, but cannot take off. If

for any reason only one battery is available during flight, land the aircraft immediately and replace the batteries as soon as possible.

Make sure to press the Battery Removal button when removing the battery.

Make sure to use the included TB55 batteries. TB50 batteries are not recommended as they may reduce the flight performance.

Configuring the RTK Module (for M210 RTK V2 only)

The M210 RTK V2 aircraft includes D-RTK antennas. Highly accurate positioning data can be obtained when using the M210

RTK V2 with the DJI D-RTK 2 High-Precision GNSS Mobile Station for Matrice or Network RTK service.

1. In the Camera View in the DJI Pilot app, tap

select a service type in settings.

2. If D-RTK 2 is selected, refer to the D-RTK 2 Mobile Station for Matrice user guide for information on configuration.

Contact a DJI authorized dealer for details on the use of Network RTK.

Rotate the gimbal

lock to the locked

position.

on the upper right corner, and then tap RTK. Enable aircraft RTK and

Press the propeller

down onto the mounting

plate and rotate it in the

direction indicated by the

lock icon

until secure.

Check that the propellers are secure

before each flight.

Gimbal Connector II Gimbal Connector I

Zenmuse XT

ZenmuseX4S/X5S/X7/XT2/Z30

Zenmuse Z30

Zenmuse X4S/X5S/X7/XT/XT2

Propellers with

silver rings should

be installed on

motors with the

same color marks.

High

Low