EDIFIER W360BT Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} EDIFIER W360BT. EDIFIER W360BT 10 pages. Wearable bluetooth earbuds
Imprimer la page
3.2 The distance between your Bluetooth device and the headphones should be kept within 1 m. The closer, the
better.
3.3 Enable your mobile's Bluetooth function and search the headphone.
3.4 Select 'EDIFIER W360BT' to pair up. After being connected successfully, the headphones' blue light is flashing
slowly.
Tips:
● In pairing process, if it needs pairing password, please input "0000"
● After completing paired, When used in next time, the headphones shall automatically connect the device that was
connected last time.
● Over the effective distance, if you return within 10 minutes, it can automatically re-connect, at this time, the blue
indicator flashes once per 8 seconds, and has prompt.
Connect two Bluetooth devices simultaneously
1. Pair headphone with the first Bluetooth device
2. Re‐start the headphone to enter pairing status and pair with the second Bluetooth device.
3. Operate the first Bluetooth device to connect the headphone, then finish to connect two Bluetooth device.
4. Calling
4.1 Basic call operation
Function
Answer incoming call
Reject incoming call
Cancel call
End call
Increase volume
Decrease volume
Mute
Cancel mute
Talking transferred to mobile
Headphone status
Incoming call ringing
Incoming call ringing
Calling
Talking
Talking
Talking
Talking
Talking(mute)
Talking (headphone)
3
Operation
Press the multi-function key
Press and hold multi-function key
seconds
Press the multi-function key
Press the multi-function key
Press the volume increasing key
Press the volume decreasing key
Press and hold the volume decreasing key
about 2 seconds
Press and hold the volume increasing key
about 2 seconds
Press and hold multi-function key
seconds
for about 2
for
for
for about 2