ARTHUR HOLM AHDTL Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARTHUR HOLM AHDTL. ARTHUR HOLM AHDTL 13 pages. Universal motorized system for gooseneck microphones
Également pour ARTHUR HOLM AHDTL : Manuel de l'utilisateur (20 pages)

Imprimer la page

EC REGULATIONS AND SECURITY

ATTENTION: Do not disassemble or modify the device in any way.

This symbol warns of the presence of dangerous un-insulated

voltages inside some of the components, of sufficient magnitude

to expose people to risk of electronic shock.

This symbol draws attention to important use and maintenance

instructions in the manual that accompanies the unit.

This symbol indicates that the equipment conforms to the norms

established by the European Community.

SAFETY INSTRUCTIONS

Plugs

•

Do not dismantle any part of the equipment power connector.

•

Disconnect the power plug from the AC outlet when the equipment is

not going to be used for an indefinite period of time.

Power and extensions cords

•

Use the appropriate power cord with the correct plug type.

•

Do not overload wall outlets or power cords.

•

Make sure the total ampere passed through an extension cord does not

exceed the maximum allowed by the cable used.

•

Do not place anything on the power cord.

•

Do not locate this product where a person may walk or trip over the

cord.

SAFETY INSTRUCTIONS

Wiring connected to hazardous voltage requires installation by

qualified personnel or the use of ready-made flexible cables.

For your security, your equipment must be connected to an

electrical outlet with grounding connection protection.

Since the plug is used to disconnect the device, the operating

electrical outlet must be in an easily accessible place.

Environment

• Install the equipment on an elevated, flat surface.

• Install the equipment in a ventilated area.

• Avoid exposing the equipment to:

∙

Rain or water

∙

Excessive heat, cold or humidity

∙

Area exposed to direct sunlight

∙

Dirty areas

∙

Equipment generating strong magnetic fields

• Avoid placing open containers of liquid, near the equipment.

• Keep a minimum distance of 30mm in order to have good ventilation.

• Never place above the device any sources of flames such as lighted

candles, etc.

• If you are using the device in extreme weather conditions and/

or tropical climates, the equipment should be installed in a room

which ensures a reasonable level of temperature and humidity.

• To prevent damage, the equipment must be firmly anchored to the

surface, as shown in the installation instructions.