ARTHUR HOLM DynamicCableRetract Instructions de montage - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} ARTHUR HOLM DynamicCableRetract. ARTHUR HOLM DynamicCableRetract 10 pages.

Imprimer la page

A jig is supplied in order to mark the holes and to make the installation easier.

1- Make the cut out according to

the provided pattern hole in the

table surface.

3- From below the table, place the mounting jig with

the raised square into the already made cut out,

make sure the mounting jig is centred in the cut out.

Mounting Table Brackets

INFORMATION

2- Place mounting jig in the table

bracket as indicated below.

4- Align the bracket with your table axis and mark the

screws position. Remove the mounting jig from the table

bracket. Mount the table bracket.

Mounting Jig

Front

View from

below the table