dji Phantom 4 RTK Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} dji Phantom 4 RTK. dji Phantom 4 RTK 10 pages. Remote controller
Également pour dji Phantom 4 RTK : Clause de non-responsabilité et consignes de sécurité (19 pages), Manuel de configuration (7 pages), Manuel des questions fréquemment posées (17 pages)

Black propeller

rings go on motors

with black dots.

Check that the propellers are

●

secure before each ﬂight.

7. Flight

Ready to Go (RTK)

Takeoff

Combination Stick Command

to start/stop the motors

Spinning propellers can be dangerous. Stay away from spinning propellers and motors. DO NOT start the

●

motors in conﬁned spaces or when there are people nearby.

Always keep your hands on the remote controller when the motors are spinning.

●

Stopping motors mid-flight: Perform the CSC to stop the motors. This feature is disabled by default. It can

●

be enabled in the app. Only stop motors mid-flight in emergency situations when doing so can reduce the

risk of damage or injury.

It is important to understand basic ﬂight guidelines, for the safety of both you and those around you. Do not

forget to read the Disclaimer and Safety Guidelines.

* RTK positioning is recommended. Go to DJI GS RTK > Fly >

for receiving RTK signals.

Silver propeller

rings go on motors

without black dots.

Before taking off, make sure the Aircraft Status Bar in the DJI GS RTK

app indicates Ready to Go (RTK)* or Ready to Go (GNSS).

Left stick (in Mode 2)

up slowly to take off

> RTK to enable RTK module and select a method

Press the propeller down onto the

mounting plate and rotate in the

lock direction

until secure.

Landing

Left stick down slowly

until you touch the

ground

Hold for 3 seconds to

stop the motors