dji Phantom 4 RTK Manuel des questions fréquemment posées - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel des questions fréquemment posées pour {nom_de_la_catégorie} dji Phantom 4 RTK. dji Phantom 4 RTK 17 pages. Remote controller
Également pour dji Phantom 4 RTK : Manuel de démarrage rapide (10 pages), Clause de non-responsabilité et consignes de sécurité (19 pages), Manuel de configuration (7 pages)

In Terrain Awareness Mode, is there a way to turn off the Terrain Rendering Map

display? Yes. Tap the ··· on the upper right corner in Terrain Awareness Mode, and tap the ···

on the sidebar, you can turn off the display there under General Settings.

When would I use Block Segmentation? Block Segmentation breaks large areas into

multiple sets of flight paths, which will help improve efficiency. It is recommended to plan

these flights over generally flat areas with little change in elevation for the best results.

How do I plan flight missions with Block Segmentation?

1. Select Block Segmentation;

2. Set the mapping area: manually set the mapping area or import kml files;

3. Adjust the grid size and direction;

4. Adjust parameters such as camera parameters and overlap rate.

In Block Segmentation, are the flight paths planned separately for each divided region

or altogether? The flight paths are planned altogether for all regions. Users cannot adjust

the overlap rate, height, route direction, and other parameters for each area individually.

How do I control multiple aircraft simultaneously when executing Block Segmentation

missions? After you finish planning, bind each Phantom 4 RTK with corresponding flight

mission. Then, you can start one of the missions by itself or start all missions simultaneously.

How many Phantom 4 RTK can I control at the same time while using the Block

Segmentation? At most 5.

If I operate several aircraft at the same time, is it possible that they crash into each

other? No. Thanks to the obstacle sensing technology, when two or more Phantom 4 RTK get

close to each other, they will slow down or hover automatically. They will only resume the

mission when the area is cleared.

Can I fly a mission with Phantom 4 RTK using Absolute Altitude? Yes, but only for

Waypoint Flight.

How do I fly a mission with Phantom 4 RTK using Absolute Altitude?

1. Enter RTK Settings and confirm the RTK status is FIX;

2. Select Waypoint Flight, start adding waypoints with RTK enabled, the system will

automatically record the absolute altitude of each waypoint;

3. Select Absolute Altitude in the Height popup window when you perform the

operation.

Can I fly a mission using Absolute Altitude if RTK is not enabled or if RTK is not "FIX" on

the Phantom 4 RTK? No. You can only fly using the default Relative Altitude mode without

RTK or if RTK is not "FIX".

Purchase the DJI Phantom 4 RTK w/ RTK-2 Mobile Station Combo at www.tigersupplies.com.