FITNESS AUDIO DWR-2468 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} FITNESS AUDIO DWR-2468. FITNESS AUDIO DWR-2468 12 pages. 2.4ghz digital true diversity wireless system

Imprimer la page
Audio Output Connection
There are two audio outputs on the back of the receiver, Mic-level balanced and Line-level
unbalanced. Use audio cable for the connection between the receiver and the amplifier/mixer.
Unbalanced Audio Connection: If the amplifier/mixer has a 6.3mm φ phone jack, connect a
cable from the 6.3mm unbalanced audio output from the receiver to the amplifier/mixer.
Balanced Audio Connection: If the amplifier/mixer has an XLR input, connect a cable from
the balanced XLR audio output from the receiver to the amplifier/mixer input.
1 . G
2 .
3 .
A N T. B
M I C O U T
Unbalanced audio connection (6.3φ phone plug)
1 . G
2 .
3 .
A N T. B
M IC O U T
Rack Mounting (Optional Kit)
The receiver can be cabinet-mounted by either one or two units as optional extras. If only one
receiver is to be mounted, an RMK-33 kit is available. It's installed as shown in Fig 1. If two
receivers are to be mounted, they can be assembled by an RMK-22 kit and installed as shown
in Fig 2.
Wireless Microphone System Operating Manual
1 2 V
L IN E O U T
A N T. A
D C IN
Stereo Voice-over-Music Mixer
1 2V
L IN E O U T
A N T. A
D C I N
Balanced audio connection (XLR plug)
Fig 1. Rack mount of one receiver
Fig 2. Rack mount of two receivers
2
Aeromix AMX-32.2