FITNESS AUDIO DX6-DR Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} FITNESS AUDIO DX6-DR. FITNESS AUDIO DX6-DR 16 pages. Dual-channel three redundancy digital wireless microphone system
Imprimer la page
Equalizer setting
Equalizer adjustment is actually used to increase or reduce the high/mid/low frequency
component of the speaker's restored sound. It is so-called raising or attenuating treble/bass via
frequency-specific volume controls to improve human voices or make musical instruments'
sound more prominent. According to the scale values on the screen, UP button is to increase
and boost and DOWN button to decrease and attenuate.
Adjust the level of high frequency (Treble), mid frequency (Mid), and low frequency (Bass)
respectively. All signals have been balanced by the high and low sounds after entering the
receiver so it is not necessary to adjust the equalizer during the output to the speaker. It is
recommended to maintain the value of BASS, MID and TREBLE at 0 dB.
DISPLAY
increase or decrease the low
FUNCTION
frequencies
RANGE
DEFAULT
1
Press SET button to make the frequency icon
Then press SET to choose your target EQ band between 300 (BASS), 1000 (MID) and
3000 (TREBLE) (Hz).
BASS
2
Press DOWN( ▼ ) and UP( ▲ ) button to adjust the EQ value by 2dB / step, from -8
(min) to 8 (max). The default BASS/MID/TREBLE level is 0 (dB).
3
After a level is chosen, wait about 5 seconds to save the setting and the level will not
change after reboot until the setting is changed again.
BASS
SYNC
→
SYNC
MID
increase or decrease the mid
frequencies
-8 dB～+8 dB
0 dB
appear with EQ value flashing.
SET
→
MID
SET
8
Instructions
TREBLE
increase or decrease the
high frequencies
TREBLE