Artic AR-MSCOPE-FO-200X Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Artic AR-MSCOPE-FO-200X. Artic AR-MSCOPE-FO-200X 4 pages. Fiber microscope

Imprimer la page

AR MSCOPE FO 200X//400X T

Eyespiece

Fiber Adapter

Backlight Window Focus Adjustment

Light Switch

Battery Cap

LED Access Panel (NOT USER SERVICEABLE)

Thank you for purchasing the Fiber Microscope. This instrument was designed to provide years of

Service while delivering true optical performance. The instrument is available in any of 5

magniﬁcations(200x.400x.or 500x),and can be purchased with a universal 2.5mm And 1.25mm ferrule

adapter or system you've purchased, this manual will help you through operation & maintenance.

1. SETUP

The Fiber Microscope comes fully assembled and requires only a few steps before it is ready to use. 1.

Begin by removing the instrument from its case.

2. You'll need to insert 3AAA batteries. Unscrew and remove the "Battery Cap".Insert the batteries with

the "-"side up towards the Battery Plug;"+" side down towards the Light Switch (see Figure 2). Replace

the Battery Cap and tighten.

3. If you have purchased the Fiber Microscope with a Universal Adapter,it should already be in place

and your instrument is ready to use. if you purchased an adapter separately, simply screw it into the

Threaded hole at the opposite end from the light Switch. Your instrument is ready to use.

DO NOT use the ﬁber microscope to view active ﬁber signals under ANY circumstances.

Activeﬁbersignals contain laser light, and direct eye contact with laser light should be avoided. The

failuretoavoiddirect eye contact with laser light can result in serious damage to the eye. The Fiber

Microscopemaymagnify the laser light in active ﬁber signals; direct eye contact with magniﬁed laser

light shouldbeavoided.Laser safety ﬁlters, as used on the Fiber Microscope, are no substitute for

practicing good laser safety. Ifyou are unfamiliar with laser safety practices, seek out professional

training. There are manycapabletrainers working in the ﬁber optic ﬁeld who can help.

[email protected] | www.articlatam.com

2 de 4