dji Aeroscope AS-F1800 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Aeroscope AS-F1800. dji Aeroscope AS-F1800 19 pages.
Également pour dji Aeroscope AS-F1800 : Manuel de l'utilisateur (16 pages)

Imprimer la page

Aeroscope AS-F1800

Modifying the Power Cable

You can use either of the first two procedures below to extend the power cable if it is not long

enough for your needs. Additionally, you can use the third procedure to convert it into a DC

power cable if necessary.

Procedure 1: Extending the AC Power Cable (New Plug Bracket)

1. Loosen the nut that seals the cable in the waterproof module, and remove the screw on

the top of the module to open it.

2. Cut off the original female plug bracket. Remove the power cable and replace it with a

longer one provided by yourself.

3. Solder the provided plug pins onto the neutral and live wires of the new power cable

(crimping pliers can also be used), then plug the two pins into the female plug bracket

provided in the box.

4. Remove the screw on the ground wire connector of the female plug bracket, then insert

the ground wire of the power cable into the female plug bracket and retighten the screw.

5. Insert the female plug bracket into the waterproof module and tighten the screw. Tighten

the nut to ensure a good seal between the cable and waterproof module.

Ground wire

Live wire

Neutral wire

Live wire

Neutral wire

Live wire

Neutral wire

Ground wire

Live wire

Neutral wire

Ground wire

Live wire

Neutral wire

Live wire

Neutral wire