dji FC7BMC Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji FC7BMC. dji FC7BMC 16 pages. Motion controller

DJI Motion Controller

Lock Button

Press twice to start the motors of the aircraft.

Press and hold to make the aircraft automatically take off, ascend to approximately 1 m, and hover.

Press and hold while hovering to make the aircraft automatically land and the motors to stop.

Press once to cancel Low Battery RTH when the countdown appears in the goggles.

Critical Low Battery RTH cannot be canceled.

Brake Button

Press once to make the aircraft brake and hover in place. The goggles will show

attitude and record the current position as zero attitude. To record the zero attitude, the motion controller must

be held upright and the white dot must be inside the box of the motion controller movement display. The box

turns to

when the white dot is inside.

If the aircraft is performing RTH or auto landing, press once to exit RTH.

Press and hold the brake button until the motion controller beeps to indicate that RTH has started. Press the

button again to cancel RTH and regain control of the aircraft.

If the aircraft brakes and hovers, the zero attitude may need to be reset before the flight can resume.

Mode Button

Press once to switch between Normal and Sport mode. The current mode is displayed in the goggles.

Motion Controller Alert

The motion controller sounds an alert during RTH. The alert cannot be cancelled.

The motion controller sounds an alert when the battery level is 6% to 15%. A low battery level alert can be

cancelled by pressing the power button. A critical battery level alert will sound when the battery level is less

than 5% and cannot be cancelled.

User Manual

Lock Button

Mode Button

Brake Button

. Press again to unlock the