dji FC7BMC Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji FC7BMC. dji FC7BMC 16 pages. Motion controller

Product Profile

When used with the DJI FPV Goggles V2, the DJI Motion Controller provides an immersive and intuitive flying

experience that allows users to easily control the aircraft using hand movements. Built into the DJI Motion

Controller is DJI's O3 transmission technology, offering a maximum transmission range of 6 mi (10 km). The

motion controller works at both 2.4 and 5.8 GHz and is capable of selecting the best transmission channel

automatically. The maximum runtime of the motion controller is approximately 5 hours.

The motion controller reaches its maximum transmission distance (FCC) in a wide-open area with no

electromagnetic interference when the aircraft is at an altitude of approximately 400 ft (120 m). The

maximum transmission distance refers to the maximum distance that the aircraft can still send and

receive transmissions. It does not refer to the maximum distance the aircraft can fly in a single flight.

5.8 GHz is not supported in certain regions. Observe local laws and regulations.

1. Battery Level LEDs

Indicates the battery level of the motion controller.

2. Lock Button

Press twice to start the motors of the aircraft.

Press and hold to make the aircraft automatically take off, ascend to approximately 1 m, and hover.

Press and hold again to make the aircraft automatically land and the motors stop.

Press once to cancel Low Battery RTH when the countdown appears in the goggles.

3. Mode Button

Press once to switch between Normal and Sport mode.