dji Goggles Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Goggles. dji Goggles 18 pages.
Également pour dji Goggles : Manuel de démarrage rapide (5 pages)

Imprimer la page

Coach Mode

Coach Mode is suitable for dual operator aircraft control. In this mode, the pilot using the remote

controller can focus on flight, while the Goggles operator with a slave remote controller can view the

environment in real-time FPV for more intuitive control.

By moving their head, the Goggles wearer can control aircraft orientation or gimbal movement. They

can also control the aircraft with the secondary slave remote controller that is inferior to the priority

control of the primary remote controller. Please note that only the DJI GO 4 app connected with the

primary remote controller and the Goggles can display the live view.

Remote Controller (primary)

DJI GO 4 App

√ Live View

√ Intelligent Flight Mode

Only the primary remote controller can switch flight modes.

If two operators control the aircraft simultaneously, the commands from the primary

remote controller takes priority of aircraft movements (control sticks and gimbal dial). The

secondary slave remote controller only works if the primary remote controller is not being

operated for more than two seconds, whereas the primary remote controller can always

override it to regain control. The two remote controllers follow the same priority for other

commands.

Linking Method

1. Please ensure that both the aircraft and the primary remote controller are powered on and linked

together.

2. Put on the Goggles and power on.

3. Use the touch panel to enter "Tools > Settings > Linking Settings".

4. Select "Advanced Linking > Connect one set of Goggles" and confirm. The Goggles linking

status indicator will go solid red to wait for linking.

5. Press the Link button on the Mavic Pro. Once linked, the linking status indicator will turn solid

green.

6. Select "Connect Remote Controller" and confirm in Goggles.

7. Power on the secondary slave remote controller and connect it with the mobile device.

8. Launch the DJI GO 4 app and enter the camera view. Press

Linking > Secondary Remote Controller," for successful linking in a few seconds.

DJI Goggles User Manual

Goggles (secondary)

√ Live View

√ Head Tracking

√ Intelligent Flight Mode

Remote Controller (secondary slave)

+2 s

Can't switch flight modes.

No live view, only support settings.

, then select "Remote Controller