dji ZENMUSE H20 Series Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji ZENMUSE H20 Series. dji ZENMUSE H20 Series 20 pages.

Caution

1. Please store the camera in a dry and ventilated area at normal temperature, to avoid fogging the

lenses due to excessive ambient humidity. If the lenses fog up, the water vapor will usually dissipate

after turning on the device for a while. The recommended storage environment is a relative humidity

less than 40% at a temperature of 20±5 ℃.

2. Do not expose the infrared camera lenses to a strong energy source such as the sun, lava or laser

beam. The temperature of the observation target should not exceed 800℃, otherwise it will burn

the camera and cause permanent damage.

3. Do not place the product under direct sunlight, in areas with poor ventilation, or near a heat source

such as a heater.

4. Do not frequently power on/off the product. After it is turned off, wait at least 30 seconds before

turning back on, otherwise the product life will be affected.

5. Under stable laboratory conditions, the Zenmuse H20 series achieves an IP44 protection rating by

IEC60529 standards. However, this protection rating is not permanent and may reduce over time

after long-term use.

6. Make sure the gimbal port and gimbal surface are free from any liquid before installation.

7. Make sure the gimbal is securely installed onto the aircraft, the microSD card slot cover is clean

and firmly in place.

8. Make sure the gimbal surface is dry before opening the microSD card slot cover.

9. Do not plug or unplug the microSD card during use.

10. Do not touch the surface of the camera lenses and keep it away from hard objects, as doing so

may lead to blurred images and affect the imaging quality.

11. Clean the surface of the camera lenses with a soft, dry, clean cloth. Do not use alkaline

detergents.