Fitness Quest Total Gym 1000 Manuel du propriétaire - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Fitness Quest Total Gym 1000. Fitness Quest Total Gym 1000 14 pages. Exercise system
Imprimer la page
5.
(a) Remove the 2 small safety hitch pins
located in the brackets at the base of the
right and left rails on the column end
of the unit.
(b) Fold down vertical height adjustment
column and replace pins.
6.
With caution, to avoid pinched
fingers or hands, lift up at the center
of the frame and fold the exerciser
together until it rests firmly on the front
and back crossbars about 12 inches apart.
7.
Continue to fold the exerciser together
until it is completely folded and roll the
exerciser into a closet for storage. To store
under a bed, simply lower the exerciser to the floor and roll under the bed.
TO REMOVE THE GLIDEBOARD
You can also remove the glideboard if you need to fit the exerciser under a narrow space
(between 6" and 8").
THE GLIDEBOARD WEIGHS APPROXIMATELY 15 LBS. USE CAUTION WHEN
LIFTING IT OFF OF THE EXERCISER. LIFTING INCORRECTLY MAY RESULT IN
USER INJURY.
1.
With exerciser laying flat on the floor, disconnect the pulley from the hook on the
underside of the glideboard. (The 2 small safety hitch pins should be securely
fastened through the brackets at the base of the right and left rails on the column end
of the unit.)
2.
Next, lift up the glideboard and slide it off the
frame of the exerciser. When the bench is
completely off the exerciser, set it aside.
3.
Next, remove the 2 small safety hitch pins and
fold the exerciser together as described above.
Be sure you reinsert the 2 hitch pins before folding.
Crossbar
CAUTION
USE CAUTION WHEN FOLDING THE EXERCISER.
CAUTION
— 13 —
5a.
6.
Back
12"
2.
5b.
Front
Crossbar