dji Matrice600 Series Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Matrice600 Series. dji Matrice600 Series 10 pages. Chanel exansion kit
Imprimer la page
RC Port Module
1
2
Installation
Tools Required: 1.5mm Hex Key, Phillips Screwdriver
Mounting the RC Port Module
Remove the Original Module
1. Remove the four screws on back of the remote controller with a
1.5mm hex key.
2. Remove the metal ring around the SDI port by rotating it counter-
clockwise with the special wrench in the package, remove the
plastic ring under the metal ring, and then remove the shell of
the module.
3. Remove the two screws on the PCB (Printed Circuit Board)
inside the module with a Phillips screwdriver.
4. Release the black buckles on each port of the three flat cables,
unplug the cables, and then remove the PCB.
3
4
5
1. USB Port
2. CAN Port
3. Micro USB Port
4. HDMI Port
5. Mounting Holes