dji Zenmuse X5 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} dji Zenmuse X5. dji Zenmuse X5 17 pages. For inspire 1 pro
Également pour dji Zenmuse X5 : Manuel de l'utilisateur (11 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (18 pages), Manuel (11 pages)

Imprimer la page

Be sure to set the lens to AF mode.

Always hold down the Lens Release Button before rotating the Lens Lock to unlock

it.

Mounting the Zenmuse X5 to the Inspire 1

(Watch Video: http://www.dji.com/product/inspire-1/video)

Replace the Inspire 1 Gimbal Mounting Plate

1. Remove the two black dampers at the front.

2. Disconnect the 10-PIN cable and 8-PIN cable in order. Be careful not to damage the

gimbal cables.

3. Remove the other two black dampers.

4. Attach the new gimbal mounting plate as shown below. With their flat sides facing

outwards, align the rear mounting plates with the rear bracket's screw holes. Tighten the

screws with a screwdriver.

5. Connect the 8-PIN cable and 10-PIN cable in order.

6. Place the front mounting bracket to the front bracket with its grooved side facing inwards.

Adjust the 8-PIN cable and 10-PIN cable to avoid protrusion, and then tighten the screws.

ZENMUSE X5 User Manual

Rear Mounting

Plate

Front Mounting

Plate

Mounting

Position