Artila M-508 Manuel d'installation rapide - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Artila M-508. Artila M-508 7 pages.

Enable Serial Console Port

The serial console port is disabled as factory default setting.

To enable the serial console, you need to use the serial

console cable (CB-RJ2CON-100) and connect it to port 3.

Use any terminal software such as hyper terminal and setting

as follow:

Baud Rate: 115200

Data bits: 8

Parity: N

Stop bit: 1

Terminal type: ANSI

Once system is power on, you will see "Starting M-508....",

Keep typing $$$$ to turn on the serial console function. If

the serial console is enabled, you will see "Console (ttyS0)"

as follow. Repeat this procedure will disable the serial

console and Screen will show "Console (null)"

Frequently Asked Question

1. Forgot password:

If you forgot the password for login, please use serial console to

modify the password

2. Rest M-508 to factory default setting

The factory default setting is available at /default directory. User

can copy the default setting to /etc and /home directories manually or

format the user disk to set M-508 to factory default setting.

Performing disk format will erase all the files in user disk. Therefore

please backup the files you need in USBDISK first before format the

disk. Use command:

/update —FORMAT

To format disk.

3. Forgot the IP address

If you forgot the M-508 IP address, you can use the Java Manager

available in Artila CD to search the IP address of M-508

Or use serial console port to find out the IP address by

#ifconfig