Artillian 1RMFCH Manuel d'installation et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Artillian 1RMFCH. Artillian 1RMFCH 6 pages. Artillian rops mounted fuel can holder

Imprimer la page

ATTACHING AND OPERATION

ATTACH TO MOUNTING BAR:

Note: The Artillian ROPS Mounted Toolbar is designed to

hold multiple accessories at one time. If placed appropriately,

up to 3 separate accessories may be possible. For example,

the Chainsaw Mount, Fuel Can Holder, and Beverage Cooler

Holder were designed to fit on the toolbar simultaneously.

Fig. 7 shows a fuel can holder installed onto an

Artillian ROPS Mounted Tool Bar.

8. To install the fuel can holder, rotate both cam levers

UP, then place onto the Tool Bar. See fig. 8.

Note: if the Cam Lever Latches do not sit flush on the Tool Bar, one

of the clamp plates may not have been fully open. Simply remove the

fuel can holder, rotate the cam levers up and tilt the fuel can holder

away from you to ensure the clamp plates are fully open, then

reinstall on the Tool Bar.

9. To secure the fuel can holder to the Tool Bar, rotate

both cam levers DOWN until they cam over. See

fig. 9.

NOTE: For additional security, the fuel can holder can be locked to

the Tool Bar by inserting a padlock through the holes in the mounting

bracket where shown in fig. 9.

10. To remove the fuel can holder from the Tool Bar,

rotate both cam levers UP, then lift the fuel can

holder.

OPERATION

11. For optimal functionality, the cam lever latches are

factory assembled with some friction between the

cam lever and the housing. This ensures the cam

lever doesn't accidentally flip closed while the user

attempts to install it on the bar. If the cam levers

loosen up over time, simply tighten the nut and bolt

that secure the lever to the housing until the

desired resistance on the cam lever has been

achieved.

Fig. 7 (attaching a fuel can holder)

rotate both cam levers up

to install the fuel can holder

Fig. 8 (cam lever in the open position)

padlock holes

rotate both cam levers down

to secure the fuel can holder

Fig. 9 (cam lever in the closed position)

4 of 6