Artillian 1RMTB Manuel d'installation et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Artillian 1RMTB. Artillian 1RMTB 7 pages. Rops mounted tool bar

Imprimer la page

6. Per fig. 6, install the ROPS stabilizer bracket using

one bolt and one locknut as shown. Make sure the

bracket is tight up against the ROPS tubing before

tightening the bolt in the slot. It is recommended to

use a C-clamp to clamp the stabilizer bracket to the

ROPS tube prior to tightening the fastener.

7. Attach the mounting bar to the ROPS brackets,

oriented so the Artillian logo is away from the seat

as shown in fig. 7. Use a tube clamp, two bolts, and

two locknuts per bracket. Center the mounting bar

to the ROPS and tighten bolts.

Check the mounting bar for levelness. Adjust if

necessary.

KIT INSTALLATION

ROPS

stabilizer

bracket

Fig. 6 (Install ROPS stabilizer bracket)

Logo on

mounting bar

Bolt

Tube clamp

Fig. 7 (Attach mounting bar)

4 of 7

Bolt

head

Locknut