Altronix HubWay16D Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Altronix HubWay16D. Altronix HubWay16D 8 pages. Passive utp transceiver hub with integral camera power
Également pour Altronix HubWay16D : Manuel d'installation (9 pages), Manuel d'installation (8 pages)

Imprimer la page
Altronix HubWay16D Manuel d'installation
Rack Mount Installation
1.
Remove factory installed screws from both sides of the rack chassis (Fig. 6a) .
2.
Install mounting brackets (A) on the left and right side of rack chassis using the
two (2) flat head screws (B) (included) (Fig. 6b) .
3.
Place unit into desired EIA 19" rack position and secure with mounting screws (not included) (Fig. 6c).
Fig. 6
Fig. 6a
Top
Front
Left
Remove
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Wall Mount Installation
1.
Install mounting brackets (A) on the left and right side of rack chassis using
two (2) flat head screws (B) (included) (Fig. 7a) .
2.
Place unit at desired location and secure with mounting screws (not included) (Fig. 7b).
Caution: It is necessary to make sure mounting screws are securely fastened to a beam when installing.
Fig. 7
B
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Shelf Installation
1.
Position and affix rubber pads (C) (included) at
each corner on the bottom of the unit (Fig. 8) .
2.
Place unit in desired location.
Fig. 8
C
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IIHubWay8D/HubWay16D
- 8 -
Mounting Options:
Fig. 7a
A
Left Side
Rubber Pad
Fig. 6b
Top
B
A
Mounting Hardware (Included):
K18U
Front
Left
Fig. 7b
A
Two (2) mounting brackets
Six (6) flat head screws
B
for mounting brackets.
C
Four (4) rubber pads.
HubWay8D / HubWay16D Installation Guide
Fig. 6c
Top
Front Left
MEMBER