Artis BT800 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artis BT800. Artis BT800 4 pages. Wireless tower bluetooth speaker
Imprimer la pageBLUETOOTH MODE
• Turn on the speaker and then switch to
Bluetooth Mode, the display panel will show "
BLUE", Keep the speaker and Bluetooth enabled
device within 20~30 feet or less of each other
during paring process. Different environments
may affect the transmission distance
• Set your mobile phone or the Bluetooth enabled
device to search for Bluetooth devices;
AUX MODE
• Keep the unit powered on. Plug one end of the
3.5 mm AUX cord to the headphone jack on your
device;
• Plug the other end of the 3.5 mm AUX cord into
the AUX jack on the speaker;
USB PLAYBACK MODE
• Turn on the unit. Insert USB Pen Drive with
Mp3 music into USB port, it will switch to USB
Playback Mode and then start to play music
automatically.
FM MODE
• On your remote control press FM key or on the
speaker press the MODE key for a short time
and let go, repeat this until FM Mode is
selected;
• Short press the PLAY/PAUSE key on the
speaker or on the remote control, the available
stations will be auto searched. It takes a while
for processing. Press again to discontinue and
store searched stations;
• Press the "NEXT" or "PREV" key on the speaker
or remote control to select a station;
• To delete the station, Long press the FM key
on the remote control and then It will skip to
next available station.
Website: www.artis.in | www.artisstore.com
Customer care: +91-20-26113250/60 | [email protected]
Warranty: 1 Year
• When the Bluetooth enabled finds the speaker,
select "ARTIS BT800" from the list of found
devices;
• If required, enter the password "0000". Select
OK or YES to pair the two units;
• After a successful pairing, the "BLUE" on display
will stop blinking with "plink" tone
• It successfully joins into the AUX Mode along
with "AUX" on display lights up;
• Use the connected device's audio controls for
music playback.
TF CARD MODE
• Push the Micro SD card with Mp3 music into
the Micro SD card slot with the metal contacts
facing down. The card will stick out of the slot
about halfway. Waiting for a while, it will play
music automatically.
CLOCK MODE
• Click CLK key on the speaker or remote control
to access Clock mode
• Press "NEXT" or "PREV" key to enter CLOCK
SET MODE. Once in SET MODE the preference
(CLOCK HOUR OR CLOCK MINUTE) you are
currently setting will blink on the screen.
• To adjust the currently selected (flashing) item,
press and release the VOL+ or VOL- buttons
(press and HOLD to fast adjust).
• Press PLAY/PAUSE Key to complete setting.
• Press "MODE" key on the speaker or "BT / USB
/ AUX" key on the remote control to exit.
www.artis.in
MADE IN CHINA