djpower H-S6 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower H-S6. djpower H-S6 16 pages.

WORKING WITH THE H-S6

5.1.1

Preparations

Before operating the machine, prepare according to the following steps:

Step 1: After checking that the machine and accessories are not damaged, place the machine

on a flat surface with at least 50 cm of space around the machine.

Step 2: Pour the PRO-X.2 snow fluid into the tank, taking care not to fold the tube. Damage

caused by the use of other liquids is not covered by the warranty.

Step 3: Connect the machine to the power. Before connecting, please confirm whether the

required power indicated on the technical label on the back of the machine is consistent with

the power supply.

Be sure to link the machine to a protected circuit and make sure it is properly grounded to

avoid the risk of electric shock.

Step 4: Start the machine and press the [VOLUME]/[DOWN] button to make the machine start

outputting snow.

Step 5: To turn off the unit, press the [STOP] button and turn the power supply to the OFF

position

5.1.2

LCD Control

This LCD display is optional in Chinese and English, which is convenient for customers to

operate.

•

The condition to meet this mode is: disconnect the DMX signal (when the DMX signal is

connected, this control mode is invalid).

•

The LCD controller contains 4 buttons:

Buttons

Function

Used to change pages (different pages set

<MENU>

different states)

Add and reuse the "TIME" key (timed

▲

output function)

Decrease, reuse the "volume" key (smoke

▼

output function)

Confirm/exit, reuse the "STOP" key

<ENTER>