3Jtech FWT Wifi AP Manuel d'installation rapide

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 3Jtech FWT Wifi AP. 3Jtech FWT Wifi AP 4 pages. 3jtech fwt wifi ap usb x 4 wireless router

Imprimer la page

Ver 1.0.0.0

Quick Setup Guide for FWT Wifi AP_USB x 4

1. FWT Wifi AP_USB x 4 Packing List :

Before you start installing the FWT Wifi AP_USB x 4, please verify that the package contains

the following items:

One Set of FWT Wifi AP_USB x 4,

1x RJ-45 Network Cable, RJ-11 Phone Cable,

External 3G Antenna with 3M Antenna Cable,

3G USB Dongle (Optional),

1x Power Adapter,

CD with User's Manual, and this Quick Setup Guide

NOTE: Please notify your sales representative immediately if any items listed above is missing or damaged.

2. Hardware Connection Settings

1) Connect PC to LAN port of your FWT Wifi AP_USB x 4 using a RJ-45 cable.

2) Make sure the SIM card has inserted to the modem, and the modem is ready as well.

3) Connect XDSL/Cable to the WAN port of your FWT Wifi AP_USB x 4 using a RJ-45 cable if

needed.

4) Sequentially plug the external 3G USB dongle(s) into the USB connector on your

FWT Wifi AP_USB x 4 for the load balance with multiple 3G. (For example, if you own single

USB dongle, it must be connected to USB 1 port first; if you own two USB dongles, they

must be connected to USB 1 and USB 2 ports.)

NOTE: The SIM card should be inserted when the device is powered off.

5) Connect the power cable to the power connector of your FWT Wifi AP_USB x 4.

6) For using the Fixed Wireless Terminal (FWT) function, connect an analog phone to the

PHONE port of your FWT Wifi AP_USB x 4 using a RJ-11 cable.

Fig.1 The Connection of FWT Wifi AP_USB x 4

Since 1988