djpower TOPCAT HF-90 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower TOPCAT HF-90. djpower TOPCAT HF-90 13 pages. Flame machine

Imprimer la page
5.4.3.

DMX CONTROL

5.4.3.1.
6-channel mode
Channel
Function
（CH1）
NO
（CH2）
NO
（CH3）
Ignition
（CH4）
Opening time
（CH5）
NO
（CH6）
Mode
5.4.3.2.
2-channel mode
Channel
Function
（CH1）
Ignition
（CH2）
Mode
6.

MAINTENANCE

1. To maintain the system in good performance and running status, it is recommended to running the device at least once per month.
2. In order to lubricate the pipeline and pump it is highly necessary to add 10-20ml castor oil per 10L canister.
It must not be pressurized without fuel in the tank, otherwise it will cause damage to the main board and
the pump.
Value
NO
NO
0~253
Start the ignition. When the DMX value on this channel is higher than 253, the flame
254~255
0
1~254
255
NO
0~49
50~200
201~255
DMX Value
0~253
Start the ignition. When the DMX value on this channel is higher than 253, the flame
254~255
0~49
50~200
201~255
Setting
NO
NO
Ignition OFF
machine will ignite.
Permanent fire
In steps of 10ms, to 2540ms
Opening time= DMX Value * 10ms
Permanent fire
NO
Pressure Relief Mode (Emergency Stop)
Compression Mode
Pressure Relief Mode (Emergency Stop)
Setting
No Fire
machine will ignite.
Pressure Relief Mode (Emergency Stop)
Compression Mode
Pressure Relief Mode (Emergency Stop)
- 8 -