Custom Crimp SM 300 M Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Custom Crimp SM 300 M. Custom Crimp SM 300 M 19 pages. Hose skiver

HOW TO LOAD THE OD TOOLING

1. Lift the safety guard out of the way.

2. Select the proper OD tool and verify that adjustment arms

are set to proper depth.

3. Push the PTO quick coupling (as shown) back, align grooves

on OD tool and insert until PTO snaps into place.

4. Put safety guard back into position.

HOW TO REMOVE THE OD TOOLING

1. Lift the safety guard out of the way.

2. Slide the PTO quick coupling back to release it.

3. Place the OD tool back into holder.

HOW TO ADJUST THE OD TOOLING SKIVE LENGTH

1. Verify the skive depth in the hose and ﬁ tting manufacturer's

literature.

2. Loosen the depth collar screw (as shown).

3. Lock the calipers to the desired OD skive length.

4. Place the calipers (as shown) to hit the front edge of skiving

insert and the depth collar at the same time.

5. Tighten the depth collar screw.

6. Skive hose and verity that the depth matches the hose and

ﬁ tting manufacturer's speciﬁ cations.

Skive length