djpower TOPCAT CAT-2 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower TOPCAT CAT-2. djpower TOPCAT CAT-2 13 pages.
•
Do not use in a confined space. Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
•
Be sure that no ventilation slots on the product's housing are blocked.
1.5.3
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear
panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Do not connect the machine to the dimming controller or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
1.5.4
Operation
•
Do not operate this product if you see damage to the housing or cables. Have the damaged parts replaced by an authorized technician
at once.
•
Make sure there are no flammable materials close to this product while it is operating.
•
Do not cover or plug the output nozzle during operation.
•
Do not cover the vents always.
•
Do not use the product as a space heater.
•
Never carry the product by the power cord or any moving part. Always use the handles.
•
Empty the storage bin before transporting the product.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
•
Always disconnect the product from the power source before cleaning.
•
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained,
certified technicians. Do not open the housing or attempt any repairs which can lead to damage or malfunction.
•
In the event of a serious operating problem, stop using the product immediately.
•
Use only DJPOWER Professional Neutral Fluid PRO-GX and CO2 or N2.
2
INTRODUCTION
2.1
Description
TOPCAT CAT-2 Atmospheric Generator creates fog or haze effect from a single device. It breaks through the traditional concept of fog or
haze machine by mixing CO2/Nitrogen with oil based Pro Neutral Fluid, then uses evaporator to produce massive tiny particles, delicately
enhancing the light effect.
The particles are very small, about 0.5 microns. They can spread very quickly in the air even with little air flows.
Fluid being used is made of a special environmentally friendly oil which can keep the haze stay in the air for longer time.
The high quality fine haze effect makes it best mate for the professionals to create an amazing show.
2.2
Features
• Automatic troubleshooting function.
• Automatic cleaning function.
• Low fluid consumption.
• Dual fluid supply system.
• Independent fan control, three output directions.