djpower TOPCAT H-X3 DMX Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} djpower TOPCAT H-X3 DMX. djpower TOPCAT H-X3 DMX 13 pages. Automatic dry ice machine

Imprimer la page

4.4.1

DMX Working Page

DMX Address

Standby and

setup page

unique starting address. Machines with the same starting address will be synchronized accordingly.

4.4.2

DMX Channel Assignments and Values

H-X3 DMX has 1 DMX channel and can be connected by 3-pin or 5-pin DMX sockets. Set the DMX start address within the range

of 001-512, you can independently control 512pcs devices with one DMX channel.

Function

Channel

Fog Output

TECHNICAL INFORMATION

5.1

Maintenance

5.2

Storage

Before storing the machine, clean it and empty the fluid tank.

Test and run your H-X3 DMX every month to achieve the best performance.

Pressing "▲"or "▼" to set the DMX starting address

When setting the DMX starting address, the number of channels occupied by the DMX mode

must be considered. If the starting address is too high, some channels may not be controlled.

In DMX mode, each machine responds to the control of the DMX controller through its own

When connected with DMX controller and receiving DMX signal, the LCD display will always

show current DMX starting address which can be reset by pressing "▲"or "▼".

Value

0-10

11-255

H-X3 DMX needs regular maintenance to achieve the best performance.

However, in order to achieve the best results, some cleaning and maintenance

steps are essential:

• After use, disconnect all power to the unit, please wait till the water at a safe

temperature of 86°F (30°C) or below.

• Please open the drain valve located at the base of the unit to drain the

remaining water.

Description

OFF

Increase gradually

- 10 -

1 - 512