DK Digital CDB-600 Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DK Digital CDB-600. DK Digital CDB-600 12 pages. Cd radio recorder

Imprimer la page

Playback in programmed order

You can programme the playback of tracks in a special sequence of up to 32 tracks selected

by yourself.

To select the tracks for your individual sequence, stop playback first. Then press the

PROG. button. Now "PROG" is flashing in the display and invites you to select track no.

01.

Now use the

Press the PROG. button, to store that track. "P02" in the display shows you that you now

may store track 2. Repeat above steps, until all desired tracks have been stored.

Press the PLAY/PAUSE button, to start the playback of the programmed sequence.

To delete the programme press the STOP button twice, or open the CD compartment, or

switch to radio operation. Then the PROG indication in the display goes out.

Radio operation

Move the function switch to the RADIO position. Select the desired frequency range

using the BAND switch.

For FM reception you need to pull out the telescope antenna on the rear side of the unit.

Turn the antenna to find the best antenna orientation.

For AM reception the device has a built-in antenna. If AM reception is noisy or distorted,

please turn the unit to find the best orientation.

Use the TUNING control to select the broadcasting stations. The frequency scale printed

on the top panel around the TUNING knob will help you to locate stations.

When receiving FM Stereo transmission, the FM ST indication is activated. For MONO

transmission or weak, noisy reception, put the BAND switch into FM position to improve

the sound quality.

Cassette operation

Do not use C-120 tapes or very cheap tapes. This may lead to malfunctioning and tape

spillage. Before inserting a tape please ensure that the tape reels run smoothly and that

there are no tape loops. Otherwise this might result in tape spillage.

The tapes are equipped with plastic clips which can be removed

to secure recordings against rerecording or erasing (see Fig.).

The resulting deepening may be covered with adhesive tape to

rerecord the tape.

ATTENTION!

When you have removed the erase protection, the record button will be locked and cannot

be pressed! These plastic clips are also removed in commercial music tapes.

Play Tapes

Put the function switch into the position TAPE - POWER OFF.

Press the button

tape with tape opening upwards into the cover bracket. The full tape reel should be on

the right side.

buttons to select the first track.

. The cassette compartment opens, and you can insert a recorded