Artison Sketch LCR DualMono MK 2 Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artison Sketch LCR DualMono MK 2. Artison Sketch LCR DualMono MK 2 16 pages.
Également pour Artison Sketch LCR DualMono MK 2 : Manuel de référence rapide (4 pages), Manuel de référence rapide (4 pages), Manuel d'installation (4 pages)
Imprimer la page
FINE TUNING YOUR LCR-DM SPEAKERS
Satellite / Subwoofer Crossover Frequencies:
S-LCRDM-MK2:
'SMALL' Speaker on A/V Receiver / Processor
Crossover Frequency:
o DualMono Center, 80 Hz
o Left & Right : 100 Hz
Crossover Slope: 18 dB/octave
P-LCRDM-MK2:
'SMALL' Speaker on A/V Receiver / Processor
Crossover Frequency: 80 Hz
Crossover Slope: 18 dB/octave
M-LCRDM-MK2:
'SMALL' Speaker on A/V Receiver / Processor
Crossover Frequency: 80 Hz
Crossover Slope: 18 dB/Octave
Stage Tweeter ON / OFF Switch:
This located on the rear of each speaker below the terminal cup. The switch position is as
below: Up is ON and Down is OFF.
In most applications, the Stage Tweeter should be ON. The Stage Tweeter widens the
Left & Right Channel separation by directing out of phase high frequencies, 6 kHz and up,
against the adjacent rear wall.
Turn the Stage Tweeter OFF: Installations where the speakers and FPTV are flush
mounted into recessed cabinetry or mounted in wall using the LCR DM IW KIT.
Adjustable Tweeters:
The P-LCRDM-MK2 is equipped with adjustable front firing Vifa XT25 Tweeters.
DualMono Center Channel Tweeters should both be aimed towards the center of your
primary listening area.
Left and Right Channel Tweeters should be aimed to the respective Left and Right sides of
your primary listening area.
8